ADS131M08: same

Saad Jabir

Part Number: ADS131M08

Tool/software:

Hello,

According to data sheet , if we send 0x11 , we should get 0xFF28 , the reality is that we get 0x11 as from the screenshot , can you please explain:

2 months ago

0 Dale Li 2 months ago

TI__Mastermind 39535 points

Hi Saad,

I will check your timing and get it back to you tomorrow.

BR,

Dale

0 Joachim Wuerker 2 months ago in reply to Dale Li

TI__Mastermind 22315 points

Hi Saad,

you need to send a complete frame consisting of ten 24-bit words for the RESET command to be acknowledged. You cannot short-cycle the frame when sending the RESET command. There is a note about that in the "8.4.1.3 RESET Command" section of the datasheet.

Regards,
Joachim Wuerker

Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

Data converters

Data converters forum

ADS131M08: same