TPSM365R1: Use in inverting buck-boost configuration

I have seen some documentation that indicates the output range of this series is 1 - 13 volts and others (the full data sheet) say 1 - 16 volts.  The above app note indicates the part will provide -1 to -13 volts on the output in the inverting buck-boost configuration.  I am looking for a +/- 16 volt output at well under 100ma from a 24V input and was hoping to use one of these parts as a buck converter and another as an inverting buck-boost converter.  Other parts I have seen can support their full output range in either buck or inverting buck-boost mode, is there something in this converter that limits the inverting output to only -13 volts?

Thanks Richard,

I would definitely want to know if the -13 volt limit is actual or a misprint and whether it applies to the 100ma and 150ma versions.

Let me check internally and I'll get back to you.

Thanks,

Richard 

OK, is there another small package module that will allow me to have +/-16V out at about 100ma with a 24V supply using the same module?

Thanks,

Pat