• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 46 subscribers
  • Views 42 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DAC37J82EVM: Problem with "Labview Resources"

Alex M
Prodigy 10 points
Part Number: DAC37J82EVM
Other Parts Discussed in Thread: DAC38J84

Tool/software:

Hi, I am having a problem trying to setup the DAC3XJ8X GUI, and getting the TSW14J56EVM to interface with the DAC3XJ8XEVM.

When I try and open the DAC3XJ8X GUI, I am met with a series of errors:

For context, I have followed the DAC3XJ8XEVM User's Guide (Rev. B) to the tee, and still cannot get the GUI to show that I am connected (instead, it says "SIMULATION MODE"). What can I do to properly "talk" to the DAC3XJ8X EVM?

  • 0
    TI__Guru 74179 points

    Hello,

    Please check if you have connected the DAC38j84 EVM. If so, please advise if you have seen drivers installed in the Windows Device Hardware manager?

    If not, we can advise where to install the driver. Thank you