• State
  • Locked Locked
  • Replies 0 replies
  • Subscribers 45 subscribers
  • Views 190 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DAC37J84EVM: Inquiry About FT2232H EEPROM Settings for DAC37J84EVM

Yun Seung Hyeon
Prodigy 20 points
Part Number: DAC37J84EVM
Other Parts Discussed in Thread: DAC37J84

Tool/software:

I hope this email finds you well. I am working on a custom project that involves interfacing the DAC37J84 IC via SPI using an FT4232H chip. While attempting to utilize the DAC3xJ8x GUI, I noticed a compatibility issue when configuring the FT4232H in bit-bang mode.

I suspect this might be related to differences in the EEPROM configuration of the FT2232H used on the DAC37J84EVM board. Specifically, the Vendor ID, Product ID, or other EEPROM settings might be custom-configured for your EVM.

Could you kindly provide the EEPROM configuration details (e.g., Vendor ID, Product ID, and other necessary parameters) for the FT2232H used on the DAC37J84EVM? This would greatly help us replicate the environment and ensure compatibility with the DAC3xJ8x GUI.

Thank you for your support, and I look forward to your response.