• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 173 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AMC1336: Configuration of these parameters

Johnny Chen
Expert 5050 points
Part Number: AMC1336


Tool/software:

Hi Champ,

I am asking for my customer.

They are evaluating AMC1336 with C2k SDFM solution.

They are asking the parameters in the table below, would the expert kindly point out what are the parameters for ? 

What is the differential clipping voltage / DC input to SD-modulator (V) / Bitstream 1's density / Theoretical Data filter Output / Theoretical Comparator filter Output ? 

Where could user find these information ?

Thanks and regards,

Johnny

  • 0
    TI__Expert 5050 points

    Hi Champ,

    Any chance to get some input here ?

    Thanks and regards,

    Johnny

  • 0 in reply to Johnny Chen
    TI__Expert 8455 points

    Hi Johnny,

    A lot of these parameters are defined in the AMC1336 datasheet. 

    Differential clipping voltage:

    DC input to SD-modulator (V):

    Bitstream 1s density: This parameter should be calculated based on the first three inputs. The density should follow this percentage outline. 

    Theoretical Data filter Output/ Theoretical Comparator filter Output should also be updated after you enter the first three parameters. 

    Who is your customer and what is their application?

    Best regards,

    Eva