• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 46 subscribers
  • Views 161 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DAC8775: individual output configuration a I or U

Olrik Maier
Expert 5100 points
Part Number: DAC8775


Tool/software:

Dear DAC Experts,

just to be sure, in fact that the DAC8775 has four individual output channels, every channel can be programmed as I or U out independent of the other channels ? e.g. Ch 1 as Uout, Ch 2 as Iout, Ch 3 as Iout, Ch 4 as Uout.

Beat wishes

Olrik

  • +1
    TI__Mastermind 42273 points

    Hi Orlik, 

    Yes. You can select which channel(s) are being configured with the channel select bits in register 0x03 and then configure them as either V or I in whatever range in register 0x04. To configure independently you would select one channel at a time in register 0x03 and then update the configuration for that channel. 

    Best,

    Katlynne Jones