• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 74 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADC12DJ5200RF: Instantaneous Bandwidth

Joseph Blank
Prodigy 50 points
Part Number: ADC12DJ5200RF

Tool/software:

Hello Texas Instruments,

Could you please provide the instantaneous bandwidth for both single-channel and dual-channel modes for the ADC12DJ5200RF? Additionally, if it exists, could you provide me a link to a complete datasheet that may incorporate all specifications for the device?

Thanks,

Joseph

  • 0
    TI__Expert 6150 points

    Hello Joseph,

    The instantaneous bandwidth will be determined by the clock frequency provided to the ADC. In Single channel mode the effective clock frequency will be 2x what is supplied as the internal ADC cores are operating in an interleaved mode. In decimation modes the IBW will be determined by the sampling rate/decimation factor and there will be an also additional factor of 0.8 due to the roll off the ddc filters.

    The datasheet for the ADC is located on its product page, please see link below

    https://www.ti.com/product/ADC12DJ5200RF

    Thanks,

    Eric