This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS131B04-Q1: reading RESET bit of STATUS active '1' while no reset commanded or triggered via reset pin

Part Number: ADS131B04-Q1

Tool/software:

while regular operation of sequential reading of data, i'm quite regularly observe (about every 25ms) status register with reset bit being active (set) while zeroes and garbage appears on channels. keeping reset pin high and no drops to GND observed on a scope I could conclude that no reset happens via SYNC_RESET. Additionally code has reset only at the start and then only null or read operation happen. I wonder what could be causes of the reset other then user-induced?

thank you.