Tool/software:
The afe5401 official website development board schematic diagram has a DC bias connected, but ours is not. Can it be used normally? Will it have an impact on which parameters?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
The afe5401 official website development board schematic diagram has a DC bias connected, but ours is not. Can it be used normally? Will it have an impact on which parameters?
Otherwise you need to maintain the common mode in signal path . It might affect in SNR .