ADS9817: ADS981x Initialization - Data Sheet

Tool/software:

Hello,

I saw from one answer about this issue that the first table in the data sheet ADS9817 (table 6-10) is the correct Initialization table.

If you look at the table it uses incompatible register addresses in several places. For instance, INIT_5 is set to '1' first at register 0x0A, the to '0' also at 0x0A. Later in the table it is again set to 0, but at register 0x13 (step number 13).

I assume; 

Step 9 is correct.

Step 13 sets INIT_3 to '0'? (should be register 0x12)

Step 14 sets INIT_4 to '0'? (should be register 0x13)

Are these a few more misprints? Thanks.

Mike