ADS127L01EVM: ADS127L01EVM:Mounting holes

Chiaki Tanaka

I would like to know whether there are mounting holes (including their size and placement) that allow spacers to be attached.

From the user's guide, it doesn’t seem like there are any.

When using the device, is it intended to be placed directly on a desk? I’m planning to fix it inside a jig for evaluation purposes.

Thank you.

9 months ago

+1 Keith Nicholas 9 months ago

TI__Guru 51280 points

Hello Chiaki,

No, there are no mounting holes on the ADS127L01EVM, just adhesive bumper standoffs located on the 4 corners of the board.

https://www.digikey.com/en/products/detail/3m/sj61a1/1768456

The expected use case is on a desk or lab bench. If you need to secure the board, you will need to use some type of mechanical clamp that locks it in place along the board edge.

Regards,
Keith Nicholas
Precision ADC Applications

Data converters

Data converters forum

ADS127L01EVM: ADS127L01EVM:Mounting holes