Part Number: DAC8760EMC-EVM
Other Parts Discussed in Thread: DAC8760EVM
Hello
I could not find a document that provides the test point locations for the DAC8760EMC EVM. If you could provide a pdf of their locations info that would be greatly appreciated.
-Brad
Brad,
The DAC8760EMC-EVM was set up to be a simple schematic and doesn't really have test points (at least none of the mini-loop type). Are you asking about the standard DAC8760EVM instead?
If you are asking about the DAC8760EMC-EVM, then page 16 of the user's guide has a image of the assembly drawing that shows the component locations of the board:
https://www.ti.com/lit/pdf/SBAU229
Let me know if that's not enough, and I'll see what else there is.
Joseph Wu
Thank you for the response Joseph. I was looking more for the test points that are called out in the user guide. ' This board provides test points for the SPI
inputs, power, reference, ground connections, ALARM, CLR, BOOST, and the analog outputs of the DAC. Note that DACx750 only features current outputs (IOUT), but also includes a test point for R3- SENSE. ' I could not find these breakout/test points labeled on the EMC EVM.
Brad,
I'm sorry, but I think this is just a mistake in the user's guide. This device has two EVMs that operate off of the same GUI. The other EVM does have test points on the left side of the board. I think that when the EVM user's guide was put together, the mention of test points should have been removed. For your reference, the other EVM can be found here:
https://www.ti.com/tool/DAC8760EVM
and the EVM looks like this:
Joseph Wu
