• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 47 subscribers
  • Views 119 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADC12DL1500: Reading only nonesense data

Simon Filgis
Prodigy 110 points

Part Number: ADC12DL1500

Dear TI-support,

I'm reading only nonesense data out of the ADC. When I switch to testpattern mode, the "nonesense" get stable. No more toggling, but still nonesense.

It's a little hard to describe. Could please someone setup a online meeting and have a fresh look together with me? Maybe I oversee something stupid simple.

Kind regards,

Simon

  • 0
    TI__Intellectual 1290 points

    Simon,

    Can you please share your device configuration including interface mode and clock rate?

    Are your LVDS lanes length matched on your PCB?

  • 0
    Prodigy 110 points

    Hi Bill,

    it appears that the ADC only sends testpattern data, after CAL_SOFT_TRIG has been issued. I don't know why and cannot find any reference or hint regarding that in the datasheet.

    With correct testpattern, I was able to implement bitslip logic accordingly and now I receive data.

    Kind regards,

    Simon