Windows 7 64 bit driver for Wavevision

Ethan wu

Other Parts Discussed in Thread: WAVEVISION5

Hi,

Is there programming driver for Wavevision under Windows 7 64 bit. I am trying to interface a ADC12D1800RFRB. Also, anyone can direct me to somewhere I can find information about programming this board under Linux?

Thanks,

over 12 years ago

0 Marjorie Plisch over 12 years ago

TI__Expert 3940 points

Hi Xundong,

The ADC12D1800RFRB does work under Windows 7 64 bit; we have also tried this in the lab. For driver support, see the Software Driver Installation Guide at:

http://www.ti.com/tool/wavevision5

Regretfully, there is no current support for programming under Linux.

Kind regards,

Marjorie

0 Ethan wu over 12 years ago in reply to Marjorie Plisch

Prodigy 220 points

Hi Marjorie,

Thanks for the information. The ADC12D1800RFRB did work under Windows 7 64 bit for me. However, I would like to do some my own programming with the 64 bit driver came with the Wavevision5, though there are no head files ( for 64 bits) . I did notice a design note titled as "Using the WaveVision 5 API/DLL to capture data from ADC1XDXXXX(RF)RB evaluation modules." , but that's for 32 bit driver. Is that possible for you to make the 64 bit programming interface accessible.

Thank you,

0 Jim Brinkhurst1 over 12 years ago in reply to Ethan wu

TI__Mastermind 44680 points

Hi Xundong

This related E2E thread (link below) may have some information to help you utilize the Windows 64 driver. Several other customers have already worked through this issue:

http://e2e.ti.com/support/data_converters/high_speed_data_converters/f/68/t/187541.aspx?pi65845=1

I hope this is helpful. Jim B

0 Ethan wu over 12 years ago in reply to Jim Brinkhurst1

Prodigy 220 points

Thank you

0 Dave Geerardyn over 9 years ago in reply to Jim Brinkhurst1

Prodigy 50 points

Hi Jim,

According to the post of Majorie, there was no driver available for Linux in 2012. To date, has there been an update, with Linux-support for setting the ADC board parameters?

Best regards,
Dave G.

0 Jim Brinkhurst1 over 9 years ago in reply to Dave Geerardyn

TI__Mastermind 44680 points

Hi Dave

The Wavevision tool is no longer being actively developed or enhanced. For that reason I don't expect we will ever have a Linux version available.

Best regards,

Jim B

Data converters

Data converters forum

Windows 7 64 bit driver for Wavevision