SNJ54121W Leads

Maggie Ellingson

Other Parts Discussed in Thread: SN54121

Good Morning,

I need to find out if p/n SNJ54121W is supposed to have the leads bent upon delivery. My customer ordered 85 pieces back in September and their engineering dept. is telling us the parts were not "prepped" , meaning the leads were delivered straight, not bent.

Thanks in advance for the help.

over 11 years ago

0 Wade Vonbergen over 11 years ago

TI__Guru 62930 points

Maggie, please see the datasheet. At the end of document shows the package outline of all the packages. The W pack is not shipped from TI with formed leads.

http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=sn54121&fileType=pdf

There are vendors capable of providing this service. If customer needs more information on vendors, please let us know.

Regards,

Wade

0 Maggie Ellingson over 11 years ago in reply to Wade Vonbergen

Prodigy 20 points

Hi Wade,

The customer asked for some assistance on finding a vendor that provides the lead-forming task. Could I bother you for some contacts I could relay them to?

Thank you,

Maggie

0 Wade Vonbergen over 11 years ago in reply to Maggie Ellingson

TI__Guru 62930 points

Maggie, we often use Fancort for our internal needs on trim/form operations.

http://www.fancort.com/talk/talk.html

Regards,

Wade

Data converters

Data converters forum

SNJ54121W Leads