ads7863

Chin-Win Lin

Other Parts Discussed in Thread: ADS7863, ADS7861

ads7863 set to mode3 m0=1 m1=0 and sdi =0 When power ON ADS7863 some times work Some times not . When ADS7863 did Not work there are no BUSY signal aways keep in low state ,and serial data A B out fix value

over 13 years ago

0 Tom Hendrick over 13 years ago

TI__Guru**** 182721 points

Hi Chin-Win Lin,

When the ADS7863 gets into this state, are you able to reset the device by issuing a software reset as noted on page 28 of the data sheet?

0 Chin-Win Lin over 13 years ago in reply to Tom Hendrick

Prodigy 110 points

hi Tom : I can not reset ads7863 becourse I ues it to replace orginal device ads7861 (SDI =0) , are threre any more detal data sheet of ads7863 internal control logic structure? another problem I test ads7861 (CONV shorted with RD CS=0 m0=1m1=0 A=0) Busy had signal output normal but SOA SOB aways LOW . WHY?

Data converters

Data converters forum

ads7863