• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 46 subscribers
  • Views 275 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TSW30H84EVM Support

Paulo Daving
Prodigy 20 points
Other Parts Discussed in Thread: FMC-DAC-ADAPTER, FMC-ADC-ADAPTER

Hello,

I was wondering if this RF evaluation module, and also this receiver, would have a kind of model to use in DSP Builder or System Generator.

Another question about these RF EVMs is about their compatibility with Xilinx Development Kits. Are there any adaptor cards to convert their HSMC headers into FMC?

Thanks,

Paulo Daving

  • 0
    TI__Guru* 78344 points

    Hi Paulo,

    Are you referring to Altera's DSP builder and Xilinx's System Generator? If so, we will need their help with this question. We will get back to you once you confirm.

    Regarding the ADC and DAC EVM to FMC adapters, please refer to the following:

    http://www.ti.com/tool/fmc-dac-adapter

    http://www.ti.com/tool/fmc-adc-adapter

    These two adapters are compatible with the RF transmitter and receiver EVMs. 

    -KH

  • 0 in reply to Kang Hsia
    Prodigy 20 points

    Thank you for replying, Kang Hsia.

    That's right, Altera's DSP Builder and Xilinx's System Generator. I was wondering if those RF EVMs come with some models to integrate into these tools to use with Simulink.

    I do not know if you got my meaning, but I will try to make it clear for you. In the past I bought some AD/DA daughter cards and had to create, by myself, a black box into Simulink that would access, configure and connect the AD/DA card with the FPGA pins. I think the whole task could be simplified if a model (a DSP Builder or System Generator block) was provided along with the daughter cards. Specially, the task of configuring the internal registers and submodules in order to make the EVM work.

    If I couldn't make it clear, let me know and I'll try to better explain.

    I appreciate your help.

    Paulo Daving