ADC12D1800RFRB register in WaveVision

Ethan wu

Other Parts Discussed in Thread: ADC12D1000

Hi, I am working to modify ADC12D1800RFRB FPGA code for my project. Can someone point me to the document where I can find the info related to the registers manipulated by rgstr module in adc12d1000_rfrb.v ? According to the code these registers are accessed through the Cypress interface. How can I access those registers through WaveVision GUI interface or Wvdll? And where can I find the info about the unused address space.

Thanks,

over 12 years ago

0 Marjorie Plisch over 12 years ago

TI__Expert 3940 points

Hi Ethan,

Please see the zip file uploaded in this post:

http://e2e.ti.com/support/data_converters/high_speed_data_converters/f/68/p/221473/828290.aspx#828290

Kind regards,

Marjorie

0 Ethan wu over 12 years ago in reply to Marjorie Plisch

Prodigy 220 points

Hi Marjorie, thanks for responding to my post. I actually already looked through the DLL programming guide though could not find any information about the FPGA registers. I assume that one one of the address Types in the WaveVision Hardware Access Panel can be used to access those FPGA address, could you point me to the right one. Thank you,

Data converters

Data converters forum

ADC12D1800RFRB register in WaveVision