using USB to I2C converter

sri-sri

Hello guys,

Please forgive me for posing irrelevant question here.I am doing this because, This is the biggest E2E community and I am sure that I will get some help here(After googling enough ). I have bought a new Devanth R286_USB to I2C converter and I want to write data to M24M02-DR EEProm. Have any one of you worked with this adapter before, if so can you guys please explain me how to work with it. The web site here http://www.robot-electronics.co.uk/htm/usb_i2c_tech.htm has a set of commands and I dont know how to use them will any one of you please help me.Thanking you,

Regards,

Sri.

over 13 years ago

0 Tom Hendrick over 13 years ago

TI__Guru**** 182821 points

Hi Sri,

Sorry to say that none of us on the Data Converter Team here at TI have used that adapter - when doing simple I²C routines, we have a couple of the Aardvark tools from Total Phase that we use or we write up some code for an MSP430 tool. You might try posting this query in the micro controller or consumer and computing forum as well.

0 sri-sri over 13 years ago in reply to Tom Hendrick

Genius 4140 points

Thank you so much.I will try there.

Regards,

Sri.

Data converters

Data converters forum

using USB to I2C converter