Analog Interface Board for DDC264 EVM

Mohd Zulhadi Zainal Abidin

Other Parts Discussed in Thread: DDC264

Hi TI Support,

Does anyone have a Cadsoft Eagle file of the Analog Interface Board for DDC264 EVM?.

I need to redesign the AIB to run some measurements and it be easier for me if I have the schematic and board artwork.

Thank you for the help.

Zulhadi Zainal

0 Chen Kung over 13 years ago

Hi Zulhadi,

How are you?

If it is correct, you want to take a look at the Gerber file of AIB (Analog Interface Board)?

Could you please let me know?

Thank you very much.

Best Regards,

Chen

0 Mohd Zulhadi Zainal Abidin over 13 years ago in reply to Chen Kung

Hi Chen,

Initial test using the DDC264 chips is very promising.

Yes, you are right, I like to look at the Gerber file of the AIB.

Cadsoft Eagle file would be better but if you can only provide Gerber file, that would be suffient.

Zulhadi Zainal,

0 siddartha kavilipati1 over 13 years ago in reply to Chen Kung

Hi Chen,

Can I get the Gerber file for AIB board of DDC 264 EVM.

Thanks & Regards

Sid

0 Adam Sidelsky over 13 years ago in reply to Mohd Zulhadi Zainal Abidin

Zulhadi,

Did you receive the files you needed?

Regards,

-Adam Sidelsky

0 Mohd Zulhadi Zainal Abidin over 13 years ago in reply to Adam Sidelsky

Hallo Adam,

I did manage to get the gerber files and designed my custom AIB board.

Thanks

Regards,

Zulhadi Zainal

Data converters forum