• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 48 subscribers
  • Views 476 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS1x7xEVM-PDK User Guide corrections

Craig Powers
Prodigy 45 points

8715.ADS1x7xEVM-PDK sbau197 with correction notes.pdf

Hi,

As I've used the ADS1x7xEVM, I've found many of the connector designators incorrectly listed and the PCB board labels on the picture 'blurry'.

To whom would I submit these document corrections?

Thanks

  • 0
    TI__Mastermind 23235 points

    Mr Powers -

    For future use, there is a link at the bottom of the document to submit questions/comments that goes to the document team.  Most of these items are current items that have been addressed for the next revision (or are already corrected, just not released yet).  However, we do appreciate the feedback and we will make sure this information is verified and passed along to the appropriate person(s).