• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 46 subscribers
  • Views 403 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

tsw3003

yassine abdelhedi
Prodigy 15 points
Other Parts Discussed in Thread: TSW3003

Hi TI,

I'm designing a little board to interface the TI tsw3003  with a stratix III FPGA,

can you please provide me with the dimensions and the pcb of the tsw3003 to continue my desig.

best regards

  • 0
    TI__Intellectual 1955 points

    Hi Yassine,

    Sorry for the delayed response, it's Spring Break over here [:H]

    One of our apps folks measured it with a ruler if you just want a rough size, it's 4.5/8 “ x 4.3/4”. The last # is the Header and output end.

    Also, I have allegro design files but cannot attach them as the file is too big.  This is probably what you will need to design an interface connector since it will have all the physical dimensions for the connector.  If you add me as a friend we can send private messages and then I can get your email address to send you the files.  Let me know!

    I hope this helps.

    nancy!