• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 47 subscribers
  • Views 288 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DAC8728 VMON not used

Marc Zetek
Intellectual 800 points

Other Parts Discussed in Thread: DAC8728

Hi,

We are designing a board that will use the DAC8728. We do not need the VMON pin and we do not program the control register to output anything on this pin. Should we leave this pin disconnected on our board or tie it to ground or something else? Please advise...

Thanks,
Marc 

  • 0
    TI__Mastermind 46290 points

    Hello Marc,

    When VMON is not in use it is a high-impedance node. There shouldn't be any problem with leaving it floating or connecting it to ground. Should it ever accidentally be written to, though, having it connected to either a supply potential or ground might cause problems.