WaveVision 5 and LM97600RB

George Harris2

Prodigy 20 points

Other Parts Discussed in Thread: WAVEVISION5

This is a quick question regarding the FPGA image loaded during the start of WaveVision 5. I am using the LM97600RB.

Where is the FPGA image stored? Does WaveVision 5 program the FPGA, or does it look up the image on the EEPROM?

--George

over 13 years ago

0 Marjorie Plisch over 13 years ago

TI__Expert 3940 points

Hi George,

When WaveVision5 installs on your PC, the FPGA bit image is stored here:

C:\Program Files (x86)\National Semiconductor\WaveVision5\hardware\fpga_images

There is an EEPROM on-board the LM97600RB which has been programmed, so that the software knows which .bit file to download to the board when the USB cable gets plugged in.

Kind regards,

Marjorie

0 George Harris2 over 13 years ago in reply to Marjorie Plisch

Prodigy 20 points

I would imagine that the image for the LM97600RB is spio5.5_xc5vsx95t_lm97600.bit?

0 Marjorie Plisch over 13 years ago in reply to George Harris2

TI__Expert 3940 points

Yes, that's correct.

Kind regards,

Marjorie

Data converters

Data converters forum

WaveVision 5 and LM97600RB