ADS1232REF doubt

Jose Antonio Martinez

Other Parts Discussed in Thread: ADS1232, ADS1232REF

Hello everyone,

I have bought a evaluation board ADS1232 REF,

I have been using this board without any problem but I have a doubt about it.

I want to desing a board using 2 load cells one in channel A0 and other in A1, I saw that channel A0 has different filters but A1 is connected directly from header connectors to the ADC, why this difference?

It would be better if I desing my board using these filter for channel A0 and A1?

Thanks I hope someone can help me.

Jose

over 11 years ago

0 Bob Benjamin over 11 years ago

TI__Guru** 113765 points

Hi Jose,

The ADS1232REF is a weigh scale reference design. The design only uses one input channel. The second input channel was made available for experimentation. If you use both input channels, then you should design your board to have filtering that is the same for both input channels.

Best regards,

Bob B

0 Jose Antonio Martinez over 11 years ago in reply to Bob Benjamin

Prodigy 110 points

Hi Bob,

Thanks for your answer

Jose

Data converters

Data converters forum

ADS1232REF doubt