The question about TSW1400 firmware modification

Hi Woo,

Would you prefer to make your own firmware to interface to the DAC3482?  If so you can start with this project for the TSW1400:

http://www.ti.com/analog/docs/litabsmultiplefilelist.tsp?literatureNumber=slaa545&docCategoryId=1&familyId=2023

Since the data for the DAC is coming from a static memory in the TSW1400 firmware - would it be easier to apply these changes to the pattern file before loading it into HSDC Pro and then to the TSW1400?  Or would your firmware changes be some dynamic change over the repeated buffers?  I just wondering if it would be easier to pre-process the data vs doing some kind of firmware change.

Ken.

Hi Ken.

Thanks for your answer.

Actually I have FPGA code and it needs to be verified, so I want to reuse this code as a part of the TSW1400 firmware.

Therefore I want to know whether TI give the TSW1400 firmware code to me for inserting my code into it.

My code will be used before sending digital data to DAC.

Woo.

Hi Woo,

Provide your email address and I will forward you the source code

Thanks,

Eben.

Hi Eben.

scwoo80@etri.re.kr

Thanks for your help.

Woo.

Hi again Eben,

I'm looking forward to receive the source code from you,

and I'll be really appreciated if you will give it to me ASAP.

Thank you,

Woo.

Woo,

I have sent the code to your email

Thanks,

Eben.