• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 46 subscribers
  • Views 385 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DAC5652

TimothyDarling
Intellectual 2310 points
Other Parts Discussed in Thread: DAC5652

Customer Viasat

Application Microwave

DAC5652. If you look at Figure 20 and measure the voltage across Rload at 50ohms. That would be 500mV not 1V correct since Req looks like 25ohms??

What does the data sheet mean by 1V differential it is a single ended output?

I would copy and post but the forum will not accept the paste?

Regards

Timothy

  • 0
    TI__Expert 5820 points

    Timothy

    The data sheet is correct because its talking about differential output swing, which can be measured using a differential probe placed at outputs IOUT1 and IOUT2. Your statement is also correct if you choose to ignore IOUT2.