TSW1400evm with AFE58xx 12bits

danilo_jcamara

Other Parts Discussed in Thread: AFE5805, AFE5808, AFE5809

Hi,

I developed a code to control a Supertex emission board, and I'd like to put the emission and the reception(From Texas) working together.

Jim Seton send me a code for ADS series , but I'd like to use HSDC for TSW1400 (from Texas), and I can't make this code works on AFE series. (It returns a error that there is no frame clock, as was expected...)

Can you send me source code TSW1400 - AFE58xx 12b?

Thank you

Danilo

over 10 years ago

0 jim s over 10 years ago

TI__Guru* 91947 points

Danilo,

The source code is attached.

Regards,

Jimhttps://e2e.ti.com/cfs-file.ashx/__key/communityserver-discussions-components-files/30/4034.8105.AFE580x_5F00_12b_5F00_1w_5F00_withtrigdelay.qar

0 danilo_jcamara over 10 years ago in reply to jim s

Intellectual 315 points

Thank you Jim,

I just tested this code in HSDC and it is returning a error "Frame clock error in Read DDR to file".

The FCLK pin from AFE5805 is assigned to "dinx[10]". Apparently this is correct, why I'm getting this error?

If I click in AFE5808 12b in HSDC and update the firmware the data comes ok to me.

Danilo

0 Chuck Smyth over 10 years ago in reply to danilo_jcamara

TI__Expert 6320 points

Hi Danilo,

I support these AFE devices. Can you please tell me which device you are working with? I believe HSDCPro should download with device support for "AFE5808_09_xxb". This should work with AFE5809,5808,5807, and 5803. This probably won't work with 5805 and 5804, though. Let me know.

Thanks,

Chuck Smyth

0 danilo_jcamara over 10 years ago in reply to Chuck Smyth

Intellectual 315 points

Hi Chuck,

I'm working with AFE5805evm and TSW1400evm. Using HSDCPro if select device AFE5808 12b it works fine and I can see and save data.

I asked for this code, Jim Seton from High Speed Data Converter Forum send me a code but it is not working as AFE5808_12b code.

This code returns me a error in HSDCPro that frame clock not occurred... I'd like some help to fix it.

Thank you

Danilo

0 Aitzol Iturrospe over 9 years ago in reply to danilo_jcamara

Prodigy 50 points

Hi,

I am trying to create a firmware for the TWS1400 from the following 4034.8105.AFE580x_12b_1w_withtrigdelay.qar source code. I am using the evaluation 9.1. Quartus II build.

I am not able to create the rbf file... could you help me?

Thanks

Aitzol

0 Aitzol Iturrospe over 9 years ago in reply to Chuck Smyth

Prodigy 50 points

0 Aitzol Iturrospe over 9 years ago in reply to jim s

Prodigy 50 points

Hi,

What Quartus version do I need to compile this project?

Thanks

Aitzol

Data converters

Data converters forum

TSW1400evm with AFE58xx 12bits