ADS1258EVM without MMB0

Daniel Vamos

Other Parts Discussed in Thread: ADS1298

Dear TI Community,

I would like to use ADS1258EVM without its MMB0. Is it possible? I have found a very good guide for ADS1298 here: http://e2e.ti.com/support/data_converters/precision_data_converters/w/design_notes/1137.aspx

Do you have any similar "guide" like ADS1298?

Thank you for your answers.

over 10 years ago

0 Christopher Hall over 10 years ago

TI__Mastermind 44680 points

Hi Daniel,

Welcome back!

I just added a similar guide for the ADS1258EVM here:

http://e2e.ti.com/support/data_converters/precision_data_converters/w/design_notes/2670.ads1158-ads1258-faq.aspx

I'll add on more details about the SPI connections later; however, you should be able to use the default J3 jumper connections. The main thing to be aware of is the on-board level shifter (U12).

Best Regards,
Chris

0 Daniel Vamos over 10 years ago in reply to Christopher Hall

Genius 3950 points

Dear Chris,

Good to see you again!

Thank you very much for your always detailed answers! This guide is awesome! I will follow for the updated SPI description.

Just keep up the good work!

0 Christopher Hall over 10 years ago in reply to Daniel Vamos

TI__Mastermind 44680 points

Hi Daniel,

I finished updating the SPI section of the E2E Wiki guide. As always, let me know if you have additional questions!

BR,
Chris

0 Daniel Vamos over 10 years ago in reply to Christopher Hall

Genius 3950 points

Hey,

Thank you for the update!

"As always, let me know if you have additional questions!" - Don't worry, you can count on me! ;)

All the best!

Data converters

Data converters forum

ADS1258EVM without MMB0