ADS1292ECG-FE board not recognised

viney chaddha1

Other Parts Discussed in Thread: AFE4400, ADS1292ECG-FE, MSP430F5529

I have installed the software and connected the demo board to the PC. I am getting that the ECG recorder is not detected. i do not see the driver in the com port list. i have a AFE4400 EVM also installed. When I connected the board for the first time it said the driver installed correctly. Is it possible that it is installing the AFE4400SpO2 driver again? How do I install the driver for this manually.

over 10 years ago

0 Ryan Andrews over 10 years ago

TI__Guru 66246 points

Hi Viney - I realized that we missed this post. Did you eventually get the ADS1292ECG-FE demo to work?

0 viney chaddha1 over 10 years ago in reply to Ryan Andrews

Expert 1280 points

Ryan,

Yes I got it working. I also wish to ask the following:

If I want to make a booster pack kind of board and want it to work with the MSP430F5529 Launch Pad then can i change some of the pin assignments in the firmware and run it using the demo program?

Regards

Viney Chaddha

Data converters

Data converters forum

ADS1292ECG-FE board not recognised