Interfacing the stellaris LM3S8962 with the ADS1298

Lukas Kienzler2

Other Parts Discussed in Thread: LM3S8962, ADS1298

Hi all,

I was wondering if you could guide me to some existing code examples for SPI with regard to interfacing a stellaris controller with the ads1298. I'm using the lm3s8962 controller.

I know there is an older post but I couldn't find the example.

Thank you for your help!

Regards,

Lukas

over 10 years ago

0 Joachim Wuerker over 10 years ago

TI__Mastermind 23275 points

Hi Lukas,

I will check with Tom again if he was able to find any ADS1298 example code as mentioned in this post.

Regards,

0 Tom Hendrick over 10 years ago

TI__Guru**** 181021 points

Hi Lukas,
I'm sorry to say that we do not have any sample code. The example noted in that older post never materialized.

0 Joachim Wuerker over 10 years ago in reply to Tom Hendrick

TI__Mastermind 23275 points

Hi Lukas,

although we don't seem to have example code for the ADS1298 specifically, you may want to look at some of the other code examples given here which should give you at least a general idea of how to interface a Stellaris processor to our data converters. Unfortunately the examples are all for SAR type ADCs, while ADS1298 is a delta-sigma ADC. So I am not sure how useful this will be. But I thought I point it out at least.

Regards,