• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 47 subscribers
  • Views 446 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Interfacing ADS12322 Ref Evaluation board with CC3100 WI-FI Module

Akshaya Dharmajan
Prodigy 170 points

Other Parts Discussed in Thread: CC3100, ADS1232, ADS1232REF

Hello Everyone

Is the data available from ADS1232 ref Evaluation board sent using WI-FI module CC3100, are these boards compatible to each other ?,can we interface cc3100 with ADS1232.

Thanks & Regards

  • 0
    TI__Guru** 113765 points

    Hi Akshaya,

    The ADS1232REF was designed primarily to demonstrate the ADS1232 as a standalone weigh scale.  The second purpose was to demonstrate the performance of the ADS1232.  Also, when used as an analysis and performance tool, neither the ADS1232REF firmware nor GUI will support weigh scale mode.  There was never an intention to connect the ADS1232REF as a part of a wireless system, mostly because these systems did not yet exist at the time the board was developed.  There is really no good way to connect the ADS1232REF to a wireless system.  It would be much easier to start a new design for this specific purpose instead of trying to adapt the ADS1232REF.

    Best regards,

    Bob B