• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 46 subscribers
  • Views 367 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Programming the MSP430 in the AFE4403 Eval board?

sarath tv
Intellectual 295 points
Other Parts Discussed in Thread: AFE4403

Hi,

I have a AFE4403 eval kit with me and i intend to use this for heart rate monitoring application. Can any one enlighten me on How to program the MSP controller in the EVK. Is it possible to load and debug  through USB or do we need a  separate JTAG?

Thanks in advance 

Sarath

  • 0
    TI__Mastermind 18285 points
    Sarath,

    Section 7 of the user's guide describes how to update the firmware without the GUI using the BSL. Once you have software written you can get a hex file and update the firmware this way. You will need an MSP430 FET tool and a JTAG connector if you intend on using a debugger.