• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 46 subscribers
  • Views 477 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS1191

Andrei Zinenko
Intellectual 710 points
Other Parts Discussed in Thread: ADS1191

Hi,

Could anybody send me a link with typical schematics for ADS1191 and firmware?

Kind regards

  • 0
    TI__Mastermind 38745 points
    Hey Andrei,

    Unfortunately we don't have anything for the ADS1191 specifically, but I would advise looking at the users guide for the ADS1x9xECG-FE Demonstration Kit (www.ti.com/.../slau384a.pdf) which contains a schematic for the EVM board which is used for our ADS129x family of products which is similar. Ignore the respiration functionality and note that on the ADS1191, which is a 1 channel device, the channel 2 inputs must be shorted together.

    In terms of firmware, we have the firmware for that EVM which uses the MSP430 (ftp.ti.com/.../ADS1292). Note that the difference between the ADS119X and ADS129X family of products is the data word size. The ADS1191 has a 16-bit data word whereas the ADS129X has a 24-bit data word.

    Regards,
    Brian Pisani