INA333 + ADS1294 FOR EEG Measurement

rex kao

Other Parts Discussed in Thread: INA333, ADS1294, ADS1299

Hi~

I have EEG design , I used INA333 +ADS1294 for EEG measurement . But I don't know INA333 (IN+,IN-, REF , ) and ADS1294 (IN+,IN-, REF, DRV) connection .

Have friend can recommended connection method it?

Figure is my problem point.

over 10 years ago

0 Pete%20Semig over 10 years ago

TI__Mastermind 25825 points

Hello rex,

For EEG measurement I recommend evaluating the ADS1299 because it is lower noise. It also contains low-noise PGAs so that you should not require the INA333.

I will move your post to the precision data converters forum for further assistance.

0 Brian Pisani over 10 years ago

TI__Mastermind 38745 points

Hey rex,

In agreement with Pete, I believe you should look into using the ADS1299 due to its spectacular noise performance. If you go that route, electrodes can be connected directly to the ADS1299 pins and you can amplify the signal using the internal PGAs. Is that a viable option?

Regards,
Brian Pisani

0 rex kao over 10 years ago

Prodigy 30 points

Dear Pete, Brian,

Thank you reply for my issue . I will first study ADS1299 FOR EEG design.

Data converters

Data converters forum

INA333 + ADS1294 FOR EEG Measurement