Weight and dimension of EVB FMC-ADC-ADAPTOR and ADS5474EVM

INg

Genius 3475 points

Other Parts Discussed in Thread: ADS5474EVM, ADS5474, FMC-ADC-ADAPTER

As proof of concept. My customer would like to do up a mock up with a Xilinx EVB to below two TI evb

ADS5474EVM

FMC-ADC-ADAPTOR

He needs the weight and the dimension of both boards fo rthis mock up.

Pls advise

Ivan

over 10 years ago

0 Wade Vonbergen over 10 years ago

TI__Guru 62930 points

Ivan, what end device is this to support so I can move you to correct forum?
Regards,
Wade

0 INg over 10 years ago in reply to Wade Vonbergen

Genius 3475 points

HI Wade

Thanks for the response

The device supported is

ADS5474

The FMC-ADC-ADAPTOR is to be used with ADS5474

I quote

FMC-ADC-Adapter passive interconnect board enables the output of TI’s LVDS output high speed ADCs to be directly connected to a standard FMC interconnect header, a typical input on the latest Xilinx FPGA EVMs

Ivan

0 Wade Vonbergen over 10 years ago in reply to INg

TI__Guru 62930 points

Ivan, since you are looking at the commercial version of the device, I will move you to the High Speed Converter forum.

Regards,

Wade

0 Richard Prentice over 10 years ago

TI__Mastermind 29220 points

Hi,

The ADS5474 EVM weighs 72 grams, and the dimensions may be seen as 4.77" x 3.9" as shown on the fabrication drawing which is attached.FAB DWG revA.pdf

The FMC-ADC-ADAPTER weighs 48 grams, and the dimensions from the fabrication drawing are listed as 5” x 3.40”. The fabrication drawing showing dimensions can be found in the physical design database for the board on the TI web page for that board.

Regards,

Richard P.

Data converters

Data converters forum

Weight and dimension of EVB FMC-ADC-ADAPTOR and ADS5474EVM