ADS1293 EVM Design Files for new EVKit

Prabath Gallage49

Other Parts Discussed in Thread: ADS1293, ADS1293EVM

Do you have the design files for the (specially BOM ) for the new ads1293 EV kit (not the one with BLE)? And in the given schematic for the EVkit where does the reset switch(SW1) placed? Does it necessary www.ti.com/.../ads1293evm

over 10 years ago

0 Bahram Mirshab over 10 years ago

TI__Expert 3350 points

The EVM design files of ADS1293 are not available at this time. Please see page 10 of the ADS1293EVM User's Guide (see the circled area in the below portion of the schematic). The reset switch is not necessary, but you may want to control the pin via a GPIO on your prototype design.

http://www.ti.com.cn/cn/lit/ug/snau138b/snau138b.pdf

0 Prabath Gallage49 over 10 years ago in reply to Bahram Mirshab

Prodigy 70 points

Hi
Thanks for the reply Bahram. I am doing a prototype design using ADS1293 AFE. For the moment i am using the design for ADS1293 BLE EV kit. What is the reason for this EV kit not having the referance design?

And do we need to add ESD protectors for leads if we are using a defibrillator with this IC?

Data converters

Data converters forum

ADS1293 EVM Design Files for new EVKit