About Capture Board of ADS62P43

Yoshihiro,
Yes it is possible, however a specific INI for the ADS62P43 needs to be verified. We will get back to you as soon as possible.
Ken

Ken-san,

Thank you for your reply.
When will you get it, please provide us it.
After that, we will check it with TSW1400.

Best regards,
Yoshihiro Hirata

Yoshihiro,

I expect it to be the same as the ADS62P49. Give this a try.

Regards,

Jim

Jim-san,

Thank you for your support!!

I wait your result.

Best regards,

Yoshihiro Hirata

Yoshihiro,

Were you able to do a valid capture with this ini?

Regards,

Jim

Jim-san,

 

I don't have ADS62P43EVM, I have only tsw1400EVM.

Then, can I do a valid capture?

 

Best regards,

Yoshihiro Hirata

Yoshihiro,

You need an ADS62P43EVM and the TSW1400EVM to evaluate the ADS62P43 device. I am assuming this is your goal based on your first post.

Regards,

Jim 

Jim-san,

Thank you for your reply.
However, these EVMs are very expensive.
So, I want to confirm that we evaluate ADS62P43EVM with TSW1400EVM before buying these.

I was checked following before my first post.

Evaluate ADS62P43EVM with TSW1200EVM on User's Guide.
---> However, TSW1200EVM was EOL.

TSW1400EVM is attaching on ADS62P43EVM product folder.
---> I want to believe this information.
So I was check some documents.
However I didn't find information about it.

Yoshihiro Hirata

Jim-san,

Thank you for confirming them.
I understand it.

Best regards,
Yoshihiro