About Capture Board of ADS62P43

yoshihiro hirata

Other Parts Discussed in Thread: ADS6243, ADS62P43, ADS62P49, ADS62P48

Can we evaluate LVDS mode and CMOS mode of ADS62P43EVM with TSW1400EVM?

If answer is yes, what ADC part number we select on GUI? ADS6243?
If answer is no, please tell ous Capture Board number to evaluate ADS62P43?

I installed "High Speed Data Converter Pro" and "HSDCpro Patch v3.00.10.exe" in my PC.

Best regards,

Yoshihiro Hirata

over 10 years ago

0 Ken C over 10 years ago

TI__Genius 12965 points

Yoshihiro,
Yes it is possible, however a specific INI for the ADS62P43 needs to be verified. We will get back to you as soon as possible.
Ken

0 yoshihiro hirata over 10 years ago in reply to Ken C

Expert 1425 points

Ken-san,

Thank you for your reply.
When will you get it, please provide us it.
After that, we will check it with TSW1400.

Best regards,
Yoshihiro Hirata

0 jim s over 10 years ago in reply to yoshihiro hirata

TI__Guru* 91947 points

Yoshihiro,

I expect it to be the same as the ADS62P49. Give this a try.

Regards,

Jim

0 yoshihiro hirata over 10 years ago in reply to jim s

Expert 1425 points

Jim-san,

Thank you for your support!!

I wait your result.

Best regards,

Yoshihiro Hirata

0 jim s over 10 years ago in reply to yoshihiro hirata

TI__Guru* 91947 points

Yoshihiro,

Were you able to do a valid capture with this ini?

Regards,

Jim

0 yoshihiro hirata over 10 years ago in reply to jim s

Expert 1425 points

Jim-san,

I don't have ADS62P43EVM, I have only tsw1400EVM.

Then, can I do a valid capture?

Best regards,

Yoshihiro Hirata

0 jim s over 10 years ago in reply to yoshihiro hirata

TI__Guru* 91947 points

Yoshihiro,

You need an ADS62P43EVM and the TSW1400EVM to evaluate the ADS62P43 device. I am assuming this is your goal based on your first post.

Regards,

Jim

0 yoshihiro hirata over 10 years ago in reply to jim s

Expert 1425 points

Jim-san,

Thank you for your reply.
However, these EVMs are very expensive.
So, I want to confirm that we evaluate ADS62P43EVM with TSW1400EVM before buying these.

I was checked following before my first post.

Evaluate ADS62P43EVM with TSW1200EVM on User's Guide.
---> However, TSW1200EVM was EOL.

TSW1400EVM is attaching on ADS62P43EVM product folder.
---> I want to believe this information.
So I was check some documents.
However I didn't find information about it.

Yoshihiro Hirata

0 jim s over 10 years ago in reply to yoshihiro hirata

TI__Guru* 91947 points

ADS62P63 test data.pptxYoshihiro,

I just received an ADS62P63EVM, connected it to a TSW1400EVM, selected ADS62p48_49 for the ADC and was able to do a valid capture. The results are attached.

Regards,

Jim

0 yoshihiro hirata over 10 years ago in reply to jim s

Expert 1425 points

Jim-san,

Thank you for confirming them.
I understand it.

Best regards,
Yoshihiro

Data converters

Data converters forum

About Capture Board of ADS62P43