• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 46 subscribers
  • Views 975 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MMB0 Schematic

Martin Bishop
Prodigy 125 points

Other Parts Discussed in Thread: ADCPRO, ADS1278

The MMB0 schematics have moved to ftp.ti.com/.../mmbx%20sch ...


Is someone going to fix up all the broken links I tried, before I went foraging ?
The 2 on the end of ADCPro is where the wheels come off the pram


Also, is there a pdf handbook/manual for the MMB0 ?

VMTiA

Martin

  • 0
    TI__Guru* 99675 points
    Martin,


    If you were referred to the schematics from this page:

    e2e.ti.com/.../1294.schematics-for-the-mmbx ,

    Then the link has been fixed. Thanks for pointing out the broken link.

    Unfortunately, there is now handbook or manual for the MMB0. It was designed to work with the ADCPro platform and we don't consider it a reference design.


    Joseph Wu
  • 0 in reply to Joseph Wu
    Prodigy 125 points

    Joseph

    Thank you for reponding quickly and for fixing one of the broken links.

    I've downloaded the ADCPro pdfs which cover the install and run aspects of the MMB0+ADC from a user standpoint. Reading between the lines I take it that the MMB0 schematic and the AdcPro source code is all that is available. What I need is an 8 channel ADC to plug into a DSP rig - I suspect the MMB0+ADS1278 frame-sync serial interface will oblige.

    A search on MMB0 will bring up about half a dozen broken links on the first page of the search.

    Regards

    Martin