• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 47 subscribers
  • Views 655 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

electrode and firmware for ads1299 eeg fe board.

qi wang
Intellectual 480 points
Other Parts Discussed in Thread: ADS1299, ADS1299EEGFE-PDK

Hi,

I am using the ads1299 eeg fe-kit to collect eeg or ecg signal. Can you please take a look at following two questions? Thanks.

Can I just use wire to connect the body and the board? In  'ADS1299EEG-FE Users Guide (Rev. A)' , Figure 36. Dedicated Reference and Bias Electrode, why the electrode is composed of a pair of resistor and capacitor?  Is it mandatory to use this pair of resistor and capacitor as the electrode, or they are just a model of the electrode?

By the way, if I purchase 'ADS1299EEGFE-PDK:ADS1299EEG-FE Performance Demonstration Kit', it seems there is no firmware for this kit. Do you know where to download it?

Thank you!

Regards,

Chia