• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 483 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Single lead ECG device using ads1298

Harsh garg
Intellectual 895 points
Other Parts Discussed in Thread: ADS1298

What is the circuit for ecg device using ads1298 ic

  • 0
    TI__Mastermind 38745 points
    Hey Harsh,

    What do you mean by this? Would you like an example schematic of a PCB that includes the ADS1298? You can refer to the schematic near the end of the user's guide for the ADS1298ECG-FE, which is the evaluation module for the ADS1298.

    Regards,
    Brian Pisani
  • 0 in reply to Brian Pisani
    Intellectual 895 points
    hello sir,

    I want to ask about what is the proper circuit which design on both the board of ADS1298ECGFE. if want to make whole circuit using ads1298 64 pin IC then where i have to connect resistance or capacitance or other things because i want to make whole circuit on Breadboard and want to connect how to connect electrode with this circuit (is directly to circuit ?) and what type of cable on other side of electrode we need.

    Regards,
    Harsh garg
  • 0 in reply to Harsh garg
    TI__Mastermind 38745 points
    Hey Harsh,

    My very first recommendation would be to read the datasheet for the ADS1298 thoroughly. This will contain all relevant information about how to use the ADS1298. After you have done that and you still would like to see a working schematic, then you can take a look at the schematic to that EVM I mentioned in my first response.

    Regards,
    Brian Pisani