• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 46 subscribers
  • Views 395 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

how to connect lcd display with ads1298 directly ?

Harsh garg
Intellectual 895 points
Other Parts Discussed in Thread: ADS1298

how to connect lcd display with ads1298 directly

  • 0
    TI__Mastermind 38745 points
    Hey Harsh,

    This is not possible. You will have to use some sort of processor to interface with the ADS1298. Please refer to the ADS1298 datasheet for details.

    Regards,
    Brian Pisani
  • 0 in reply to Brian Pisani
    Intellectual 895 points
    Hey Pisani,

    I refer whole datasheet. pls suggest me circuit i have only ic ads1298 in my hand what other thing things i need to make complete ecg circuit pls help me i'm in trouble.

    Regards,
    Harsh garg
  • 0 in reply to Harsh garg
    TI__Mastermind 38745 points
    Hey Harsh,

    You will need to solder the chip to a printed circuit board that you design for the system and program a microcontroller to interface with the chip. Unfortunately, this question is well beyond the scope of this forum. I would recommend reaching out to your coworkers in your office or your professor or teaching assistant if you are in school regarding the basics of mixed signal PCB design. Once you have an idea of how you'd like to design your system, I'd be happy to answer your questions.

    Regards,
    Brian Pisani