• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 47 subscribers
  • Views 847 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

cc4000 gps module interfacing

nikhil sasne
Prodigy 60 points

hello,

I have selected TI's CC4000 gps module for my GPS application.

so, I have some question regarding interfacing,

1]   Is i possible to interface only gps module to controller or I have to buy any supporting evolution kit for it ?

If there is any evolution kit I have to select please let me know...

  • 0
    TI__Guru** 100335 points
    Nikhil,


    I'm not sure where this post should go. I see that you've posted into one of the etc forums, and I hope you get an answer there, but there isn't anyone on this particular forum that has any experience on this device.

    I've looked into this a little and it looks like the CC4000 GPS module is no longer directly supported by TI. There is some reference to the following third party: www.gns-gmbh.com/index.php

    There still is a wiki that may still be active:

    The processors.wiki.ti.com/.../CC4000_GPS_for_MCU

    Other than that, I haven't been able to find much information about this device. Again, I hope that you get an answer in your most recent post.


    Joseph Wu