AFE4300 Read and Write Register

SATTAR MALOKANI

Other Parts Discussed in Thread: AFE4300

Hello,

On the datasheet page 19 written "Note that every time a register is read, it must be rewritten, except while reading data output register"

can anybody explain what does mean by "data output register", if I am not wrong does this mean ADC_DATA_RESULT (Address 0x00)

I have already the FAQ posted by Praveen but there also not clear which data output register.

thanks,

sattar malokani

over 10 years ago

0 Joseph Wu over 10 years ago

TI__Guru** 101055 points

Sattar,

I've moved this post from the Precision Data Converter Forum to the Medical Forum, where the AFE4300 is supported. I'm sure you'll find an answer here.

Joseph Wu

0 Praveen Aroul over 10 years ago

TI__Guru 50036 points

Hi Sattar,

Yes Register Address 0 (ADC_DATA_RESULT) is the data output register.

0 Abdul Sattar over 10 years ago in reply to Praveen Aroul

Prodigy 120 points

Hi Praveen.

Thanks a lot for clearing my confusion.

Regards.

Sattar

Data converters

Data converters forum

AFE4300 Read and Write Register