This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS1292R Output rate control

Guru 16770 points
Other Parts Discussed in Thread: ADS1292R, ADS1292

Hi

We have a question about operation of ADS1292R.

We want to set tDR is 1msec, so we are setting DR0-2 = 011 for 1KSPS data rate.

We expect that tDR (output rate) would be 1msec, but tDR becomes 2msec frequently.
IC works in RDATAC mode. SCLK is not changed.

We don't know why it happens.
Do you have any ideas?

Best Regards