Integration TIDA-00096 and TIPD111?

Alexander Riftine

Prodigy 50 points

Other Parts Discussed in Thread: TIDA-00096, TIPD111, ADS1293

Hello Everybody,

I want to know is it possible to integrate TIDA-00096 ECG monitor and TIPD111 hardware pace detector.

Thank you in advance.

over 8 years ago

0 Praveen Aroul over 8 years ago

TI__Mastermind 49746 points

Hi Alexander,

I've moved this post from the Medical Forum to the Precision Data Converter Forum, where the TI design TI-00096 is supported. I'm sure you'll find an answer here.

0 Brian Pisani over 8 years ago in reply to Praveen Aroul

TI__Mastermind 38745 points

Hello Alexander,

TIPD111 requires a ECG signal to scan for pace. ADS1293, the AFE on TIDA-00096, has the ability to output the multiplexed ECG channels to either the RLDIN or WCT pins, but I do not believe those nets are brought to headers on TIDA-00096. Perhaps someone more familiar with the ADS1293 can comment.

Brian

0 Michael Stout over 8 years ago in reply to Brian Pisani

TI__Genius 16890 points

Hi Alexander,

The Pace signal is available on the WCT pin of the ADS1293. It is not brought out to a connector on the TIDA-00096 design, but is brought to a via that you might be able to solder to.

Mike

Data converters

Data converters forum

Integration TIDA-00096 and TIPD111?