• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 47 subscribers
  • Views 641 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS52J90EVM HSDC GUI About pop window at new lane rate

masahiko shimizu
Guru 11235 points

Other Parts Discussed in Thread: ADS52J90EVM

Hi,

My customer is using ADS52J90EVM and TSW14J56.
Using condition is JESD204B.

He changed ADC Output Data Rate of HSDC GUI, then pop-up window was showed.
It is below picture.
Where and What does he change setting for this pop-up window?
-> HMC-DAQ's setting?

Best regards,
Shimizu

  • 0
    TI__Mastermind 44680 points

    Hi Shimizu

    This popup message is generally for information only. If the customer has properly configured the ADC EVM to give 60M samples per second output rate using the GUI then the JESD204B reference clock will already be at the frequency shown in the popup.

    Best regards,

    Jim B