• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 47 subscribers
  • Views 945 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DAC081C081 slave addredd

Nat Wong
Genius 3070 points

Other Parts Discussed in Thread: DAC081C081

Dear Sirs

For slave address of DAC081C081,

Why  DAC081C081 has two slave address when ADR0 is floating (SOT package)?

What is the slave address (0001100 or 1000110) when ADR0 is floating (SOT package)?

BRS

Nat

  • 0
    TI__Genius 16890 points
    Hi Nat,

    The DAC will respond to either address. This information is needed if you are using more than 1 device on the I2C bus. When using the part, if there are other devices on the I2C bus, make sure that they do not have either of these addresses. For example, if you are writing to the DAC with address 0001100 and you have another device with address 1000110 and you write to the second device the DAC will try to respond and a conflict will happen.

    Mike
  • 0 in reply to Michael Stout
    Genius 3070 points
    Dear Mike
    Thank you for your great support.
    BRS
    Nat