• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 518 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

HDSC without the GUI opened

MaurizioMirabile
Prodigy 60 points

Hi!

I would create a Labview.vi to manage my ADC converter, without open the GUI of the High Speed Data Converter Pro software.

Is it possible? Or i must modify dll libraries?

Thank you so much.

Best regards.

Maurizio

  • 0
    TI__Mastermind 44680 points

    Hi Maurizio

    It is possible to use Labview or other software tools to control the High Speed Data Converter Pro GUI, but I believe the GUI needs to be opened before this can be done.

    Please see the response to this similar question previously asked:

    If you search for High Speed Data Converter Pro Automation in the search field at the top of this page you should be able to find some other discussions on this topic.

    Best regards,

    Jim B